5. Click
Start
.
17.5.12 Automatic Firmware Upgrades
Firmware upgrades provide enhanced functionality. The system will automatically check for
firmware upgrades if it is connected to the Internet.
To configure automatic firmware upgrade:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
2. Click
INFORMATION
. Click the
Update/Reset
on the side panel, then click the
Upgrade
tab on the top panel.
3. Ensure
Automatically Check for Updates
is checked. If it was previously unchecked, click
OK
to save changes.
4. Click
Check for Updates
to check for a newer firmware version.
5. If a newer version is found, click
Upgrade Now
to upgrade the system.
17.6 Network Settings
Configure general system settings, recording schedule, motion settings, and more.
17.6.1 Selecting DHCP or Static IP Address (TCP/IP)
Configure IP address settings.
To configure IP address settings:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
#LX400113; r. 9.0/57192/57197; en-US
72
