13.4.1
IP Addressing Options
CAUTION
This section is for advanced users only.
To enable dynamic IP addressing:
NOTE
Dynamic IP addressing is enabled by default.
1. Press
. Move the joystick left / right to highlight
Settings
and push the joystick to
select.
2. Select
Network
and push the joystick to confirm.
3. Select
Network Setting
.
4. Select
Dynamic IP
, then select
On
. Push the joystick to confirm.
5. Press
until all menus are closed.
To enable static IP addressing:
NOTE
•
A static IP address is not required for remote access to the system.
•
You may have to configure your router settings if the DHCP server is enabled.
1. Press
. Move the joystick left / right to highlight
Settings
and push the joystick to
select.
2. Select
Network
and push the joystick to confirm.
3. Select
Network Setting
.
4. Select
Static IP
.
5. Highlight the
IP Address
field and push the joystick. A cursor appears.
6. Move the joystick up / down to change values, and move the joystick left / right to move
the cursor. Push the joystick to confirm the value in the IP address field.
NOTE
Ensure you enter a static IP address that is not in use by another device in your network.
#LX400077; r.43964/43966; en-US
38
Summary of Contents for LW2760 Series
Page 1: ...USER S GUIDE LW2760 Series...
Page 2: ......
Page 3: ...USER S GUIDE LW2760 Series LX400077 r 43964 43966 en US iii...
Page 71: ......
