background image

• You can use a RJ45 coupler or switch (not included) to connect male 

ends of Ethernet cable together.

• To extend the cable run beyond 300ft (92m), a switch will be required 

(sold separately).

LNE8950A_QSG_EN_R1

4K HD IP Dome Security Camera 

with Audio

•  4K HD IP Dome Security Camera 

•  Mounting Kit*

•  Mounting Template*

•  CAT5e Ethernet Extension Cable with Pre-attached  

  RJ45 Cable Gland*

•  Allen Key*

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use of the product and handle with care.

• Use the camera within given temperature, humidity and voltage levels 

noted in the camera’s specifications.

• Do not disassemble the camera.

• Do not point the camera directly towards the sun or a source of  

intense light.

• Use only the supplied regulated power supply provided with the 

product. Use of a non-regulated, non-conforming power supply can 

damage the product and void the warranty.

• Periodic cleaning may be required. Use a damp cloth only. Do not use 

any harsh, chemical-based cleaners.

• The supplied cable is rated for surface mounting only. Cables for in-wall  

and floor-to-floor installations are sold separately (CMR type). These 

and other cables are available at 

lorextechnology.com

* Per camera in multi-camera packs.

Copyright © 2017 Lorex Corporation 

As our products are subject to continuous improvement, Lorex reserves the right 

to modify product design, specifications and prices, without notice and without 

incurring any obligation. E&OE. All rights reserved.

Quick Start Guide

English Version 1.0

LNE8950A SERIES 

Package Contents

ATTENTION: 

It is recommended to connect the camera to the NVR or an external PoE switch. If 

using a DC power adapter (not included) with the camera, a REGULATED power supply 

is REQUIRED for use with this camera. Use of a non-regulated, non-conforming power 

supply can damage this product and voids the warranty.

Safety Precautions

Dimensions

www.lorextechnology.com

Extend the cable run for your camera. Additional extension cables sold 

separately. See table below:

Cable Extension Options

Cable Type

Max Cable Run 

Distance

Max # of 

Extensions

CAT5e (or higher) Ethernet cable

300ft (92m)

3

• For a full list of compatible recorders, visit  

lorextechnology.com/compatibility

• Not intended for submersion in water. Installation in a sheltered 

location recommended.

Disclaimers

4.2” / 

106mm

4.2” / 106mm

3.2” / 

82mm

• Point the camera where there is the least amount of obstructions  

(i.e., tree branches).

• Install the camera where vandals cannot easily reach.

• Secure cabling so that it is not exposed or easily cut.

• This camera is rated for outdoor use. Installation in a sheltered location is 

recommended.

Installation Tips

Resources

Need Help?

Visit us online for up-to-date software  

and complete instruction manuals

Click on the 

Downloads

 tab

4

Visit 

lorextechnology.com

Search for the model number  

of your product

Click on your product in the  

search results

3

2

1

CAT5e 

Ethernet 

Extension 

Cable

RJ45 Cable Gland

Using the RJ45 Cable Gland

 

(Optional)

The RJ45 cable gland is pre-attached to the 

included CAT5e ethernet extension cable.

The RJ45 cable gland covers the camera’s Ethernet connector and the RJ45 plug to 

provide weather-resistance and protection from dust, dirt and other environmental 

contaminants.

To use the RJ45 cable gland:

RJ45 Cable 

Gland Barrel

Camera Ethernet 

Connector

NOTE

: The RJ45 cable gland is weather-resistant. Seal the cap with silicone and/or 

electrical tape for additional sealing if it will be exposed to precipitation regularly.

Twist the RJ45 cable gland barrel securely onto the camera Ethernet connector. 

Reviews: