2. Click
STORAGE
, then click the
FTP
tab.
3. Click to enable (
) / disable (
) FTP connection, and select either
FTP
or
SFTP
depending on your configuration.
4. Configure the following:
•
Server Address:
Enter the FTP server’s address.
•
Port:
Enter the FTP port.
•
Username:
Enter your FTP username.
•
Password:
Enter your FTP password.
•
Anonymous:
Enable if your FTP server supports anonymous login.
•
Storage Path:
Enter the path to save recordings and/or snapshots to..
•
File Size:
Enter the recording file length in minutes.
•
Camera:
Select a camera to set FTP recording preferences for.
•
Day:
Select a day of the week to configure FTP recording settings for, or select
All
to apply
to all days of the week.
•
Period 1 ~ Period 2:
Select up to 2 periods of time where the system will save recordings
to the FTP. Check
Alarm
,
MD
(Motion Detection), or
Continuous
beside each period to
determine which recording type will be uploaded to the FTP.
•
Image Upload Interval:
Enter the interval between snapshots in seconds.
•
Camera:
Setup a camera to set the snapshots for.
5. Click
Apply
.
15.10
Account
See chapter 14
Managing Passwords and User Accounts
15.11
Information
Menus that show you different types of system information.
15.11.1
Version
The Version sub-menu allows you to view information about the current firmware installed on the
system.
#LX400111; r. 5.0/56647/56647; en-US
83
Summary of Contents for D861 Series
