Lorex D861 Series User Manual Download Page 85

Page: 85 / 122

Using the Main Menu

5. Configure the following:

•

Type:

Select the address type.

•

IP Address:

Enter a single IP address for the selected filter type.

6. Click

7. Click

Apply

15.8.6

Save System Settings to a USB Flash Drive

The system allows you to save your current system configuration to a USB flash drive (not in-
cluded). This is useful if you want to backup your current settings.

NOTE

This function only saves settings created in system menus. It does not save or backup any video.

Prerequisite:

•

Connect a USB flash drive (not included) to a free USB port on the unit.

To save system settings:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

SYSTEM

, then click the

CONFIG BACKUP

tab.

#LX400111; r. 5.0/56647/56647; en-US

Summary of Contents for D861 Series



























































































































Search results

Summary of Contents for D861 Series

Reviews:

Related manuals for D861 Series

Brands by name

Popular brands

Lorex D861 Series, User Manual

Search results

Summary of Contents for D861 Series

Reviews:

Related manuals for D861 Series

Brands by name

Popular brands