Lorex D861 Series User Manual Download Page 67

Page: 67 / 122

NOTE

Audio will only be heard if you are viewing an audio-enabled camera in single-channel view. You will also need
an HDMI monitor with built-in speakers, or an external speaker connected to the recorder’s

Audio Out

port (see

Connecting Audio Devices

, page 96 for details).

To set preferences for listen-in audio:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

2. Click

DISPLAY

, then click the

Display

tab.

3. Check

Live Audio

4. Set the desired volume for live audio.
5. Click

Apply

15.5.3

Menu Transparency

Set the level of transparency for system menus.

To set menu transparency:

1. From the Live View display, right-click to open the Quick Menu, then click

Main Menu

#LX400111; r. 5.0/56647/56647; en-US

Summary of Contents for D861 Series



























































































































Search results

Summary of Contents for D861 Series

Reviews:

Related manuals for D861 Series

Brands by name

Popular brands

Lorex D861 Series, User Manual

Search results

Summary of Contents for D861 Series

Reviews:

Related manuals for D861 Series

Brands by name

Popular brands