Lorex D861 Series, User Manual

Page: 103 / 122

Pan/Tilt/Zoom (PTZ) Cameras 17
To add patterns:
1. From the Live View display of your PTZ camera, right-click to open the Quick Menu, then
click
Pan/Tilt/Zoom
.
2. The PTZ controls open. Click to open advanced PTZ controls, then click .
3. Click the Pattern tab.
4. Under Pattern , enter the number of the pattern you want to create.
5. Move the camera to the desired starting position, then click Start .
6. Using the on-screen controls, move the camera in any pattern you wish. When finished, click
End .
To run a pattern:
• Under No. , select the number of the pattern you want to go to, then click .
17.7 AutoScan
An autoscan automatically cycles between a left and right point.
To configure autoscan:
1. From the Live View display of your PTZ camera, right-click to open the Quick Menu, then
click Pan/Tilt/Zoom .
2. The PTZ controls open. Click to open advanced PTZ controls, then click .
3. Click the
Border
tab.
4. Move the camera into the desired left position and click Left .
5. Move the camera into the desired right position and click Right .
To run autoscan:
• Click .
#LX400111; r. 5.0/56647/56647; en-US 95