3. Click
Add New Holiday
.
4. Configure the following:
•
Holiday Name:
Enter a name for this holiday.
•
Repeat Mode:
Select
Once
for the holiday to occur only this year or
Always
for the holi-
day to be repeated each year.
•
Holiday Range:
Select
Date
to select a specific date, or select
Week
to select holidays
based on which week they fall on.
•
Start Time / End Time:
Set the start and end time for this holiday.
•
Add More:
Click to enable (
) to configure another holiday.
5. Click
Add
.
14.7.4 Configuring IP Filter
Configure permissions for external IP addresses attempting to access the unit.
To configure the IP filter:
1. From the Live View display, right-click to open the Quick Menu, then click
Main Menu
.
2. Click
SYSTEM
, then click the
SECURITY
tab.
3. Under
Type
, select which type of filter to apply:
•
Network Access — Whitelist:
IP addresses that are permitted to access the recorder.
•
Network Access — Blacklist:
IP addresses that are not permitted to access the recorder.
•
Sync Time — Whitelist:
IP addresses that are permitted to sync the recorder’s time.
4. Click to enable (
) / disable (
) the selected filter type.
#LX400111; r. 2.0/56089/56100; en-US
67
