Lorex D241 Series, User Manual

Page: 28 / 114

Recording 8
2. Click STORAGE . Click the SCHEDULE tab on the side panel, then Record on the top panel.
3. Under Channel , select the channel you would like to configure or select All .
4. Configure the schedule as needed:
• Check Continuous , MD (Motion Detection), or Alarm to select the recording type you
would like to configure.
• Click-and-drag on each day to customize the recording schedule. The schedule is set up as
a grid, which each block representing one hour.
• Click beside 2 or more days to link schedules ( ). This allows you to quickly
change multiple schedules at once.
• To make fine adjustments to a schedule, click . This will allow you to set exact start
and end times for a schedule.
• To disable all recording of the selected type on the selected day, click .
5. Click Apply .
6. (OPTIONAL) Click Copy to apply the settings for the current channel to one or more other
channels (see 14.11 Copying Settings to Another Channel , page 79 for full instructions on us-
ing the copy function).
8.4 Setting up Scheduled or Manual Recording
You can set the system to record based on a schedule or you can manually turn recording on and
off. By default, the system is set to always record on a schedule.
To configure the recording schedule, see 8.3
Setting the Recording Schedule , page 19.
#LX400111; r. 2.0/56089/56100; en-US 20