DESCRIPTION
Smart Sw is a versatile device for the home & building automation. It can perform several functions easily
programmable with the dedicated Android App and be remotely controlled by one or more key-fobs with a high degree
of digital protection.
INSTALLATION
Warning! Work on electrical connection only after the supply voltage has been switched off.
Smart Sw enclosure is suitable to be installed inside electrical junction boxes, electronic devices or to be fixed on wall.
To access the 10A model terminal blocks remove the 4 screws which hold the 2 orange protection covers.
Terminal blocks connection:
The 2 poles terminal block has to be connected to the power supply (80 - 240V AC) following line and neutral symbols,
the 3 pole block is connected to the contacts of a relay (voltage free), the sticker show the connection diagram where
NC indicates the normally CLOSE contact, NO indicates the normally open contact and COM indicates the common
contact.
fig 1: 6A
switch
fig 2: 10A switch
PROGRAMMING
Download and install the Android App “
LC Param Manager
”
for the parameters setting from
Google Play Store
.
(be
sure the phone is equipped with the NFC antenna).
Setting up of switch parameters is done wireless via Near FielCommunication (NFC) technology. When asked by the
App, to communicate, the phone has to be placed on top of the Smart enclosure where the NFC symbol is.
FUNCTIONS
Smart Sw can perform different functions selectable from the “Set up menu” (accessible via the
“Select Switch Type” button) like:
-Remote Control ON/OFF SWITCH: The switch is turned ON and OFF by keyfob.
-Remote Control ON/OFF TIME SWITCH: Like a timer switch, enabled by keyfob, turn ON and OFF, according to
daily/weekly programmable time charts.
-Remote Control DUTY CYCLE SWITCH: The switch, enabled by keyfob, turn ON an OFF cyclically according to
programmable duty cycle times.
-Remote Control PULSE SWITCH: The switch, enabled by keyfob, turn ON briefly (impulses) a certain amount of
times. Duration, number and lapse between impulses is programmable by App.
-ON/OFF TIME SWITCH: The switch is always enabled and turn ON and OFF according to daily/weekly
programmable time charts.
WiFi SERVER COMMANDS
The device can be controlled as well as the keyfobs also with an internet browser like Firefox, Chrome, Opera.
For this purpose it's available the “WiFi server bridge 433” whose detailed description is given on our site.
