IEPE-Link
™
-LXRS
®
Wireless Sensor Node
User Manual
System Operation Overview
16
3.5
Channel Configuration
Node channels are configured for the sensor connected to it. The sensor settings are stored in
the node memory for that channel. Only the channels and configuration options that are
available on the type of node being used will be available in the configuration menus.
1. To enter the configuration menu, right-click on the node name, and select Configure >
Configure Node. The Channels tab displays channel options available for the current
node.
a.
Channel Enabled:
indicates the channel number. The check box is used
to enable the channel and select it for sampling. The icon next to the check
box describes the channel type, which is intrinsic to the node being used.
b.
Current channel configuration:
The data output, units, input, and label
describe how the channel is currently configured.
c.
Configure:
Select the channel Configure button to change the channel
parameters. The channel must be enabled first by selecting its adjacent
check box.
Figure 7 -
Node Channels Menu
