3DM-CX5-GNSS/INS
User Manual
4
2.2
Interface and Indicators
The 3DM-CX5-GNSS/INS sensor interface includes a communications and power input connector and
a GNSS antenna port. The sensor is installed using the mounting and alignment holes as needed.
The indicators on the 3DM-CX5-GNSS/INS include a device status indicator and the device information
label. The table below describes the basic status indicator behavior. The device information label includes
the sensor frame diagram (axis orientation), which will be critical during device installation.
Indicator
Behavior
Device Status
device status
indicator
OFF
no power applied
rapid flash
streaming data with no GNSS
lock
steady blink
streaming data with GNSS
lock
slow pulse
idle mode, awaiting
commands
Figure 2. Sensor Indicator Behaviors
