LORCH T 180 AC BasicPlus, Operation Manual

Page: 28 / 242

Explanation of symbols
- 28 - 01.21 909.2669.9-02
1 Machine elements
5
9
10
11
12
13
6
7
8
18
14
1
2
3
4
1
Control panel
2
Connection socket torch/electrode holder/coponent
guide
3
Torch switch socket
The full HF ignition voltage is present at the
wires of the torch control socket.
Never connect anything else than the control
plug of the hand torch.
4
Gas connection torch
5
Connection socket component guide/electrode holder
6
Transportation belt
7
Handle (hoisting point)
8
Mains cable holder
9
Main switch
10
Mains cable
11
Shielding gas connection
12
Connection bushing water cooler WUK 7
13
Remote control socket
14
Accessories belt
18
Power supply socket
The carrying strap is exclusively for the
transport by a person.
Illustrated or described accessories are par-
tially not included in the scope of delivery.
Subject to change.
2 Explanation of symbols
2.1 Meaning of the symbols in the opera-
tion manual
Danger of physical injury or death!
If the danger warnings are disregarded, this can
cause slight or severe injuries or even death.
Danger of property damage!
Disregarding danger warnings can cause dam-
age to workpieces, tools, and equipment.
General note.
Designates useful information about the prod-
uct and equipment.
2.2 Meaning of the symbols on the machine
Danger!
Read the user information in the operation
manual.
Disconnect the mains plug!
Pull out the mains plug before opening the
housing.
i i
ii