Analog
1. Mount the device on a 35 mm DIN rail.
1
Quick Installation Guide
4. Statuses, colours and behaviour of the diode (if the device is properly
connected):
In case of problems, the device can be reset with the “Reset” button.
Device is working correctly (power and memory) - GREEN colour
Device is working incorrectly (power and memory) - RED colour
LoRaWAN frame sent - single WHITE flash
Confirmation from server after receiving the frame - single WHITE flash
Frame failed to confirm within specified timeout - single RED flash
LoRaWAN Disconnected - flashing BLUE
Connecting to BLE - flashing BLUE
4
Important!
By default each input is configured as current. If you
want to configure one or more inputs as voltage you have to do it
before connecting sensors. The configuration is possible via BLE.
Version 2 - December 2021
