7 |
L ’ O R S u p r ê m e
3. Placement and operation
⚠
THE APPLIANCE MUST BE FLUSHED WITH FRESH DRINKING WATER BEFORE THE FIRST USE.
3.1 First use
Open the water tank cover,
remove the water tank lid.
Take the water tank out of the
machine.
Clean the tank for the first use
with a food grade cleaning agent,
rinse well after cleaning.
Fill up with fresh drinking water.
Ensure that the water tank is
correctly aligned. [front] towards
you. Install the lid, and close the
cover.
The machine can be connected to
the water mains.
This may require a water filter or
water softener depending on your
local water quality.
Please contact your service
representative for installation.
The power plug and accessories
are included in the waste bin.
Remove the drip tray to retrieve
the parts.
Connect the milk pipe (1) at the
machine side, and guide into a
milk pack (milk version)
Connect the power cord (1) to the
machine, and plug into a power
outlet.
Switch the machine on.
The display shows the steps to
guide the user through the initial
settings.
The machine will heat-up until the
operational temperature has been
reached, and start a rinsing cycle.
CAUTION
Hot water is flowing from
the outlets.
