⚫
The top line will read “Pedal mode.”
⚫
Turn the knob to select the setting that you wish.
⚫
Press ENTER.
MIDI Clock Out
The LP1 is capable of providing a MIDI clock output. This is used to synchronize another LP1, a drum
machine, or any other device that accepts a MIDI clock input. The clock output is based on the length
of the first track and the number of beats per measure configured in the ALL track menu.
To enable MIDI clock output from the main menu:
⚫
Press the MENU button until the main menu is selected. The main menu says “Looperlative LP” on
the top line of the display.
⚫
Turn the knob until the second line of the display reads “MIDI Clock Out”.
⚫
Press ENTER
⚫
The top line will read “MIDI Clock Out.”
⚫
Turn the knob to select the setting that you wish.
⚫
Press ENTER.
Selecting tracks by changing volume or feedback
When using multiple MIDI continuous controllers (CC) to change volume or feedback, the LP1 can be
programmed to automatically change track to the last track modified by a MIDI CC message. To
enable this feature:
⚫
Press the MENU button until the main menu is selected. The main menu says “Looperlative LP” on
the top line of the display.
⚫
Turn the knob until the second line of the display reads “Track Follows CC”.
⚫
Press ENTER
⚫
The top line will read “Track Follows CC.”
⚫
Turn the knob to select the setting that you wish.
⚫
Press ENTER.
Programming the LP1 to use MIDI pedals or dials
The LP1 can accept MIDI CC messages to control volume and feedback. To program a MIDI pedal,
follow the following procedure:
⚫
Press the MENU button until the main menu is selected. The main menu says “Looperlative LP” on
the top line of the display.
⚫
Turn the knob until the second line of the display reads “Calibrate Pedal.”
⚫
Press ENTER.
⚫
The display will read “MIDI controller?”
⚫
Change the pedal position and then press ENTER.
⚫
The display will read “Move nn To Min.” “nn” will be replaced by the CC number of the pedal.
⚫
Move the pedal to its minimum position.