29.1. Hz => kHz> - List of preset frequencies in Hz.
29.2. kHz => Hz> - List of preset frequencies in kHz.
30.Start - Initial Frequency of Program nr. 5.
31.Start unit - The order of the set start frequency of program number 5 in
Hz or kHz.
32.Stop – the final frequency of the program 5, if it is identical with the first
frequency, a constant frequency will be generated.
33.Stop unit - The order of the set final frequency of program number 5 in
Hz or kHz.
34.Duration - Duration of generating the set frequency of program number 5
or the time of tuning of the entire set frequency range.
35.Start generator - Starts the program generator number 5 and then ends.
36.Direction - "Ascending" - Frequencies move from START to the
frequency set at STOP, "Descending" - Frequencies are generated from
the upper frequency value set for "STOP" to the lower frequency for
"START" (for all START and STOP frequencies).
37.Repeat - if "YES" is selected, the programs are repeated over and over
again.
38.Sleep timer - timer setting for automatic shutdown. When setting 0h0min,
automatic shutdown is inactive.
39.Application Coil - activation of awakening for application coil. Do not turn
on this option unless you have a special application coil attached.
40.PowerBoost - Activates higher performance, this option is forbidden to
use in EU territory due to regulatory standards.
41.Back - return to the previous menu without saving the parameters.
2
LightLoop - antenna lighting settings
1.
Off - turns off the lights
2.
RGB - Lighting with automatic light color change
1.
Change speed - Speed of color change
2.
Modulation - light flashes according to the output frequency (over
50Hz is permanently lit)