77
rigidity. The seat flexibility can be steplessly
adjusted from 50kg to 130kg, and the rigidity set
by the loader manufacturer is 70kg.
3.12 SAFETY BELT
The loader is provided with a safety belt. The operator should fasten the safety belt when
operating the loader, but he should first inspect the safety belt for worn or loose part. If
necessary, replace the safety belt.
Before using the safety belt, adjust its length to
ensure the good functioning and comfort of safety
belt. The length of safety belt can be adjusted by
moving the position of buckle in safety belt. The
anchorage of safety belt is arranged in the rear
right portion of seat. Insert the buckle into the
opening of anchorage. The anchorage will lock
the buckle.
Press the red button near the anchorage, the
buckle will spring out.
Before using the safety belt, inspect the
anchorage.
3.13 CAB DOOR LOCK
The keys to the right and left doors of Cab are the same. If the door is locked, the core of
lock cannot be pressed down with the thumb. To open the door, insert the key into the lock
core, clockwise turn the key for 180° and then take it out, press down the lock core and
pull out the door. To close the door, insert the key into the lock core, counterclockwise turn
the key for 180° and then take it out.
3.14 USE OF LOCATING LOCK
If the cab door opens 180°, the locating lock will be caught by the lock catch, which is
outside the cab. The control handle of locating lock is arranged in the middle of door.
Pressing down the handle will release the locating lock, to close the door.
