71
Rocker switch assembly
(on right door decorative board)
1. Rear Wiper switch: this switch is used to turn on or off the rear wiper.
2. Warning lamp switch: this switch is used to turn on or off the moving warning lamp.
Before traveling, please check it for damaged or failed brake lamp, steering lamp or
small lamp. Do not traveling the loader until all failures have been removed and all
damages repaired!!!
Warning
3.9 INSTRUMENT ASSEMBLY AND HORN SWITCH
All monitoring instruments, warning system and steering indicating system of the loader
are integrated into the instrument assembly that is below the steering wheel. The
instrument system displays many items: engine water temperature, engine oil pressure,
engine speed, brake air pressure, fuel amount, transmission oil temperature, system
voltage, battery charging indicator, low brake pressure alarm, low transmission oil
pressure alarm arm, loader work hour meter, left and right direction signal indicators, cold
starter switch, hand brake indicators and high beam indicator.
1
2
