Portable air conditioner unit –
Ecos 1 Operating Instruction
Unit description – Room air conditioner, portable air conditioner,
mobile cooler, Ecos
Please take a few minutes to read these operating instructions before attempting to use your Ecos1 portable Air Conditioner
1. Function selection control panel
2. Temperature & timer control panel
3. Air control grille
4. Air intake grille with filter
5. Hot air outlet tube fitting
6. Handle
7. Rear air intake grille with filter
8. On / Off switch
9. Drip tank warning light
10. Dehumidification On / Off switch
11. Drip tank
Correct Installation and Position of this portable air conditioner unit
Connect the hot air exhaust to the hot air outlet at the rear of the portable unit(5) connect the window flange to the other end
and place to a window opening, The air conditioner unit should be positioned so that it has at least 20cm clearance from any
obstacles that could prevent good air flow through the front and rear intake grilles.
Portable Air Conditioner Controls
1. Fan high speed select key
2. Fan low speed select key and automatic fan
speed select
3. Cooling select key
4. Heating select key (if optional heating
element installed)
5. Programmer On / Off key
6. Lighted display
7. Start / Stop programming key
8. Time forward key
9. Time back key
10. Temperature increase key
11. Temperature decrease key
Switching the Air Conditioning On
Move the lighted toggle switch on the back of the air conditioner unit to the ON position. As soon as this is switched ON the fan
will start. If it does not, check if the ‘programmer’ key is OFF (LED out).
Routine Cleaning Filters
FRONT FILTER
– Remove the front air intake grille by pushing from the bottom towards the top at the centre of the grille. Pull it
towards you and extract it from it housing. When the grille is out, remove the filter from the runners inside the grille. Wash the
