Loma IQ3X, Operating Instructions Manual

Page: 42 / 88

Operating Instructions 42
Copyright © Loma Systems Original Document
4.5 Setting User Access Levels and Passwords
User accounts are used to manage access to the features and functionality available in the
metal detector. Four access levels are available, which are described in the User Access
section, and you may set specific passwords for each level. The password can consist of up to 4
numbers, from 0 to 9.
You may also optionally select not to use the access levels feature so that anyone using the
machine has unrestricted access to all of the available features and functionality.
To set the User Access Level passwords, proceed as follows:
1. Select Menus > Service > Passwords to display the Passwords menu options.
2. Use the Navigation Keys to select the Operator option and press the OK / Enter
Key to enable the first number for the Operator user access level password to be
entered.
3. Use the Navigation Keys to select the required first number and then press the
OK / Enter Key to confirm the selection. This will then automatically select the second
number for editing.
4. Repeat step 3 until you have selected and confirmed each number required for the Operator
user access level password. Up to four numbers may be used.
5. Once you have entered the required password, press the Cancel Key to display the Passwords
menu options again.
6.Then repeat steps 2 to 5 to enter passwords for the Supervisor, Quality and Engineer access
levels.
4.6 Turning Off the Access Level Feature
To turn off the User Access Levels feature, proceed as follows:
1. Select Menus > Service > Configuration > General to display the General menu options.
2. Use the Navigation Keys to select the Access Levels option and press the OK /
Enter Key to enable the current value to be edited.
3. Use the Navigation Keys to select either the ON or OFF option and then press
the OK / Enter Key to confirm the selection.