41
Operating Instructions
Original Document
Copyright © Loma Systems
4.4 Setting the Machine ID
The Machine ID is printed out on any Reports or Logs and can be edited to a convenient name
to allow them to be easily associated to a machine. Up to six characters, either letters or
numbers, may be entered.
To set the Machine ID, proceed as follows:
1. Select Menus > Machine details to display the Machine details menu options.
2. Use the Navigation Keys
to select the Machine option and press the OK / Enter
Key
to enable the first character of the required Machine ID to be entered.
3. Use the Navigation Keys
to select the required first character (letter or
number) to be used for the Machine ID and then press the OK / Enter Key
to confirm the
selection. This will then automatically select the second character for editing.
4. Repeat step 3 until you have selected and confirmed each character required for the
Machine ID. Up to six characters may be used.
5. Once you have entered the required Machine ID, press the Cancel Key
to exit the
Machine menu.
Summary of Contents for IQ3X
Page 2: ...Version Number Date Reason 1 29 07 2019 Initial Release ...
Page 28: ...Thispage intentionally left blank ...
Page 33: ...33 Operating Instructions Original Document Copyright Loma Systems 3 9 IQ3X Display Menu Map ...
Page 38: ...Thispage intentionally left blank ...
