35
Operating Instructions
Original Document
Copyright © Loma Systems
It is recommended that you select the 'Locked' option through the Keylock button
once you have completed your activities to prevent unauthorised access to
features and functionality.
3.11 Logging In and Out
This section provides guidance for logging in and out of the IQ3X Metal Detection System.
3.12 Logging In
The following procedures assume that the machine is switched on and working
normally and that machine access has been 'Locked'.
To log in to the machine proceed as follows:
1. Select the Keylock button
to display the current user level, which should be LOCKED if
this was set by the last user.
2. Use the Scroll buttons
to select the required user level.
3. Press the Tick button
twice to select the first password number for editing.
4. Use the Scroll buttons
to select the required password number.
5. Press the Tick button
twice to confirm the selection and display the second password
number for editing.
6. Use the Scroll buttons
to select the required password number.
7. Press the Tick button
twice to confirm the selection and display the third password
number for editing.
8. Use the Scroll buttons
to select the required password number.
9. Press the Tick button
twice to confirm the selection and display the fourth password
number for editing.
10. Use the Scroll buttons
to select the required password number.
11. Press the Tick button
to confirm the selection.
12. You are now logged in at the selected user level.
Summary of Contents for IQ3X
Page 2: ...Version Number Date Reason 1 29 07 2019 Initial Release ...
Page 28: ...Thispage intentionally left blank ...
Page 33: ...33 Operating Instructions Original Document Copyright Loma Systems 3 9 IQ3X Display Menu Map ...
Page 38: ...Thispage intentionally left blank ...