Loma IQ3, User Manual

Page: 84 / 144

Operating Instructions
To change the time and date, proceed as follows:
1.
Select Menus > Setup > Calendar to display the Calendar menu options.
2.
Use the Navigation Keys to select the Year option and press the OK /
Enter Key to enable the current value to be edited.
3.
Use the Navigation Keys to select the required Year and then press the
OK / Enter Key to confirm the selection.
4.
Repeat steps 2 and 3 above to select the required values for the Month , Day , Date , Hours
and Minutes options.
Setting the Language
To set the system language, proceed as follows:
1. Select Menus > Service > Configuration > General to display the General menu options.
2.
Use the Navigation Keys to select the Language option and press the OK
/ Enter Key to enable the current value to be edited.
3.
Use the Navigation Keys to select the required Language and then press
the OK / Enter Key to confirm the selection.
Setting the Machine ID
The Machine ID is printed out on any Reports or Logs and can be edited to a convenient name to
allow them to be easily associated to a machine. Up to six characters, either letters or numbers, may
be entered.
To set the Machine ID, proceed as follows:
1.
Select Menus > Machine details to display the Machine details menu options.
2.
Use the Navigation Keys to select the Machine option and press the OK /
Enter Key to enable the first character of the required Machine ID to be entered.
3.
Use the Navigation Keys to select the required first character (letter or
number) to be used for the Machine ID and then press the OK / Enter Key to
confirm the selection. This will then automatically select the second character for editing.
4.
Repeat step 3 until you have selected and confirmed each character required for the
Machine ID. Up to six characters may be used.
5.
Once you have entered the required Machine ID, press the Cancel Key to exit the
Machine menu.
74