Loma IQ3, User Manual, Page: 76 / 144

Getting Started
Logging In and Out
This section provides guidance for logging in and out of the IQ
3
Metal Detector.
Logging In
The following procedures assume that the machine is switched on and working normally and
that machine access has been 'Locked'.
To log in to the machine proceed as follows:
1.
Select the Keylock button to display the current user level, which should be
LOCKED if this was set by the last user.
2.
Use the Scroll buttons to select the required user level.
3.
Press the Tick button twice to select the first password number for editing.
4.
Use the Scroll buttons to select the required password number.
5.
Press the Tick button twice to confirm the selection and display the second
password number for editing.
6.
Use the Scroll buttons to select the required password number.
7.
Press the Tick button twice to confirm the selection and display the third password
number for editing.
8.
Use the Scroll buttons to select the required password number.
9.
Press the Tick button twice to confirm the selection and display the fourth password
number for editing.
10.
Use the Scroll buttons to select the required password number.
11.
Press the Tick button to confirm the selection.
12. You are now logged in at the selected user level.
66