Loma IQ3, User Manual

Page: 128 / 144

Logs and Reports
■
Average Signal Good - Displays the average product signal for all products that passed
inspection in the batch.
Shift Report
Purpose
The Shift Report contains a record of completed shift information. Shifts are compiled on a time basis.
This report is useful for monitoring and analysing shift reject rates so that improvements may be made
to reduce production costs.
Running the Report
The report is automatically created and sent over the serial link to the connected device each time a
shift is completed.
Report Contents
The report contains shift information under the following column headings:
■
Date – Displays the date that the report was generated.
■
Time – Displays the time that the report was generated.
■
Machine Identification – Displays the machine ID value.
■
Shift start time - Displays the time that the shift started.
■
Shift finish time - Displays the time that the shift finished.
■
Shift duration - Displays the time in hours and minutes that the shift lasted.
■
Number of good packs - Displays the number of accepted packs inspected during the shift.
■
Number of bad packs – Displays the number of rejected packs inspected during the shift.
Contaminants Log
Purpose
The Contaminants Log contains records of reject activity which is useful for monitoring and analysing
the occurrences and levels of contamination for specific products.
The log can hold up to 20 records. If this number is exceeded and the log has not been sent as a
report, then the oldest record is deleted to provide space for a new record.
Viewing the Log
To view the Contaminants Log, proceed as follows:
1. Select Menus > Logs to display the Logs menu and select the Contaminants option.
2.
Use the Navigation Keys to display the View Contaminants Log? menu
option.
3.
Press the OK / Enter Key to select the option. If the log is empty a +Log empty+
message is displayed.
4. If the log contains entries then the number of entries is briefly displayed.
118