Copyright © Lojer Oy, 2012
3
09/2012 Rev. 3.0
2
Introduction
2.1
Inspection upon delivery
Before the device is taken into use, check that the packaging is intact and that it has not been damaged during
transportation. Please notify the transport company and the supplier of any transit damage within two (2) days of
receiving the delivery.
Ensure that the delivery contains all the parts detailed in the delivery note. If there is anything missing from the
delivery consignment, please contact the supplier immediately.
The device can be stored at a temperature of -10...+60 °C. The permitted humidity is 30...75 %.
2.2
Before use
Remove all the bands and the blocks around the weight stack before using the product.
The device is intended to be used in normal, dry indoor conditions. Ensure that the temperature of the room is
b10…40 °C and the humidity is within the range of 30…75 %. If there is chance that device has been exposed
to temperatures below 0°C, allow it to adjust to the indoor temperature for at least 5 hours before using any of its
features.
Familiarise yourself with the instructions and carry out the following before using the device:
Make sure that all packing materials have been removed.
Make sure that the device can freely move up and down.
Do not place anything under the device (e.g. chair, because the device has to be able move freely).
Make sure that the patient’s limbs do not get caught in the frame of the device.
Do not place the device under any wall structures or too close to the wall.
Do not modify the structure of the device or install parts other than those mentioned in this
document.
Do not use the device or the accessory
if it doesn’t work properly
. Contact the service
Do not push the device on to a door sill.
The physiotherapist should always supervise the training.
Inspect the Pulley before use. Do not use if the Pulley appears damaged or inoperable.
Inspect all ropes, straps and their connections. Do not use if the component is found worn or
damaged.
Keep body and clothing free and clear of all moving parts. Failure to do so could result in personal
injury.
Do not use dumbbells or other means to incrementally increase the weight resistance, other than
those provided by the manufacturer.
Do not modify the structure of the Pulley or install parts other than those mentioned in this document
on the device.
WARNING!
Children or people with no experience of the device or those with restricted
understanding must not use the device. Children must be supervised to ensure that they do not play
with the device!
