Reviewing Day Statistics directly on the
TREL30-16
TREL30-16 User Guide
33
Trip Minimum/Maximum Temperatures
You can configure the TREL30-16 so it tracks the minimum and maximum temperatures
since it started logging. This feature needs to be enabled during configuration of the logger
in the
Advanced Configuration Settings on page 14
. Once enabled, the minimum and
maximum values will be shown when the
are reviewed on the display, before any
of the day statistic are shown.
Press the
REVIEW
/MARK
button . Instead of today's statistic data, the first screen shows
the maximum temperature recorded during the trip to date, identified by the symbol
(
U
ser
r
esettable):
Pressing the
REVIEW
/MARK
button again shows a screen with the minimum temperature
recorded during the trip to date.
Pressing the
REVIEW
/MARK
button again will then show the first day summary screen,
and you can continue to review the remaining screens.
Resetting the Trip Minimum/Maximum Temperatures
The currently stored Min/Max temperature values can be reset at any time while the unit is
recording, but not once the unit has been stopped.
To reset the values, follow this procedure:
l
Press
REVIEW
/MARK
to display the trip maximum temperature value.