7
Sawing dimensions
Feed
Up/Down
Start engine
Feed rate
Control lever
Enabling switch button
Display
Absolute measurements
Relative measurements
Measurement unit, inch/mm
Calibration, cancel
/
UP DOWN
The control lever of the Smart Set control unit
is progressive, i.e. it performs operations at an
increasing rate depending on how far from the
centre it is pushed.
The control lever is only
used in the directions
forward/back.
The enabling switch button is a safety function. It is
superior to the control unit and has to be kept pressed
down if the machine is to be activated.
The control unit of the Logosol Smart Set has a display, a set of programs, setting keys, an enabling switch
button and a control lever. To use a function you select the desired one on the control panel. Then, to be
able to execute the command, the enabling switch button has to be pressed down at the same time as the
operation is carried out by the control lever. If the enabling switch button is released, the machine will stop.
FUNCTIONS
The control unit
Control lever
Enabling switch button
