logitrans ROTATOR ELFR, Manual

Page: 13 / 32

13
At the Stops display, press on the first stop in the requested direction, and the
following is shown.
1. Use
➕
/
➖
to choose the size of the
angle or use TEACH to choose
actual position.
2. Use ✔
/
✖ to accept/cancel choice
and return to Stops display.
3. At the Stops display choose the
next stop position/angle and
repeat the procedure.
3.5.5 Deleting stop positions
At the Stops display, press “CLEAR ALL” to delete all set stop positions/angles.
3.5.4 Setting of stop position
From the factory, the forks are set to rotate continuously. When the forks have
rotated 360°, the machine stops rotating. If you want rotation to continue, it is
necessary to release/press the rotation switch on the remote control again.
It is possible to set up to three stop positions/angles for rotation in both directions.
If the machine is set with one or more stop positions/angles, the machine cannot
rotate further than the last set stop position/angle.
At home display press Setup, and
afterwards STOPS, and the following
is shown.
3.0 How to operate the Rotator