logitrans LOGIFLEX SELF1003, Manual

Page: 20 / 32

20
B
A
SELF1003/920-1600 & SELFS1003/890-1570 approx. 3 liters
SELF1003/1910-2450 & SELFS1003/1880-2420 approx. 3,5 liters
SELF1003/2850 & SELFS1003/2830 approx. 4 liters
SELF1003/3300 & SELFS1003/3270 approx. 4 liters
6.2 Oil change
Draining the oil:
1. Bring the unloaded forks down to the lowest position.
2. Most of the oil can be drained by loosening the hydraulic hose union in the
bottom of the cylinder. Activate the hydraulic pump by pressure on the switch.
The oil will run out.
3. Take off the side plates.
4. Take off the cables of the battery. Remove from the battery box: cables, two
mounting bolts (A) and cable holder (B) and push the battery box to the right.
5. The remaining oil is emptied from the oil tank by sucking up the oil.
6. Place the hydraulic hose again.
7.
Oil is filled in by removing the oil filler cap from the tank.
8. Oil quantity:
9. Place the oil filler cap again and bleed the system (see 6.3)
6.0 Long live the Logiflex