Connecting the Aerial and the Mains Socket
4
4
Unpacking
1
1
Turning the TV On for the First Time
5
5
Operating Your Remote Control
2
2
Installing the Base Stand
3
3
1. Connect one end of the RF coaxial cable to the aerial socket on the
wall and the other end of the cable to the RF (75Ω) socket at the rear
right side of your TV.
Do not connect the TV to the mains supply until you
have completed all the connections.
2. Connect the mains cable to the mains socket after you have
completed all the connections.
3. At this stage, the TV switches to standby mode. The red LED
indicator will illuminate on the front panel of the TV.
4. In standby mode, press the button on the right side panel of the
TV or on the remote control to turn the TV on. The red LED
indicator will turn blue.
29” HD Ready LED TV
Well done,
your new TV is now ready to use. You will find that there are many exciting features available. To get to know all these features, please
take some time to read the instruction manual provided with your TV.`
1. The first time you turn the TV on, it will go
straight into First Time Installation menu.
Press the OK button to start First Time
Installation menu.
2. Press the buttons to select your
desired language to be displayed on the
menu. The default on-screen menu language
is set as English. Press the OK button to
confirm.
4. Press the buttons to select DVB-T /
DVB-C and then press the OK button to
confirm.
5. Channel tuning will commence. This operation
may take up to 6 minutes. The display will
show the progress of the tuning and the
number of channels found.
DVB-C
DVB Select type
DVB-T
OK
Home Mode
Shop Mode
Mode Select
Tune Type
DTV
Germany
Greece
Hungary
Italy
Ireland
Luxembourg
Netherlands
Norway
Poland
MENU
DVB-C Scan Menu
Scan type
Full
610000
Auto
Auto
Frequency
Network ID
Symbol(ks/s)
OK
MENU
Channel Tuning
DTV
: 3 Channel(s)
Radio : 0 Channel(s)
Data : 0 Channel(s)
36%
UHF CH
Press [MENU] to skip.
(DTV)
4b. If you select DVB-C, the next step is to
configure the DVB-C system (Scan type /
Frequency / Network ID / Symbol(ks/s)). Press
the OK button to go to the tune type and
add country select menu. This step is the
same as the DVB-T's select the tune type (DTV
/ ATV) process. Press the buttons to
select the desired country and then press the
OK button to start tuning.
Remove all packaging from the TV. Retain the packaging. If
you dispose of it please do so according to any local
regulations.
TV
TV Stand Support
TV Base
Remote Control /
AAA Batteries x 2
Screw A x 1
Quick Start Guide
Instruction Manual
Screw B x 3
GB
Thank you
for purchasing your new Logik TV.
Your new TV incorporates the latest technology to enhance your viewing experience. We would suggest that you allow about 20 mins for initial setup.
Please follow this guide for a successful first time installation.
Quick Start Guide
22" Full HD LED TV
4a. If you select DVB-T, press the buttons to
select DTV / ATV / ATV + DTV. Press the
button and then press the buttons
to select the desired country and. Press the
OK button to start tuning.
USB
HDMI2
HDMI1(ARC)
PC IN
RF
COMMON INTERFACE (CI)
HEADPHONE
PC AUDIO
1
2
To mains
socket
RF Coxial Cable
(not included)
OR
During tuning your TV may have received signals
from more than one transmitter. If this has
occurred the Target Region Setting screen will be
displayed. This will enable you to select the
correct regional transmission for the local news
service that you require.
Press the buttons to adjust each option's
setting and then press the OK button to confirm.
Target Region Setting
Country Code
GBR
Primary Region
England
Secondary Region
Tertiary Region
London
This will be shown as GBR for the UK.
Target Region Setting
1
2
3
4
1
This will show the regional country (England, Wales,
Scotland, NI).
2
This will allow you to set the region for your local
news service on BBC and ITV (London, Beds and
Cambs etc).
3
You may receive signals from more than one
transmitter within the Secondary Region, (e.g Beds
and Cambs may have Luton or Sandy Heath).
4
3. Press the buttons to select your desired
mode and then press the OK button. Press the
button to select Yes to confirm or the
button to select No to cancel and return to the
Mode Select menu.
Make sure the (+) and ( – ) ends of
the batteries match the (+) and ( – )
ends indicated in the battery
compartment.
1. Press and lift the back cover to open the
battery compartment of the remote
control.
2. Insert two AAA size batteries. Close the
battery compartment cover.
1. Lay the TV down on a flat surface with the back side facing up. Please make sure a soft cushioned material (such as a pillow or thick piece of foam) is placed
beneath the screen.
2. To install the TV stand, first attach the stand support to the TV by using screw A. Align the screw hole then use screw A to fix the stand support to the TV.
3. To install the base stand, align the screw hole, then secure with a screw driver (not included) using the 3 screw B provided.
screw
screw
Screw A x 1
Screw B x 3
TV Front
Base Stand
Front
(QSG-L22FE13N-130617V1-1)
L22FE13N
First Time Installation
Please ensure aerial is plugged in!
Then press OK button.
OK
English
Svenska
Dansk
ýesky
Slovak
Norsk
Suomi
Please select an OSD Language
L22FE13N_QSG_130617_Annie.pdf 1 17/6/13 6:59 PM