CLONING
Logicube ZXi-
10G™ User’s Manual
37
Once a repository is selected, a new image file can be created by tapping the
New File
icon. An image name can be auto-generated, or user-specified.
The
More Info
icon is available to see more information about the image. When
selected, a screen will appear showing details on the selected image file.
4.5 Starting the Cloning Operation
Once all the settings and options have been selected or set, tap the
Start
icon to begin the Cloning
operation. A confirmation screen will appear. Tap the
Yes
icon to continue.
A progress bar will appear at the bottom of the screen showing the bytes processed, the rate (speed),
elapsed time, time remaining, and bad sectors (on the Master drive, if any).
When finished,
the status will show “COMPLETED”. At this point, it is recommended to tap
Reset Task
to reset the task, so the drive bays properly reset and do not show as being used or assigned for other
tasks.
