QUICK START
Logicube ZXi-
10G™ User’s Manual
27
Details on the different Network
Settings screens can be found in
Section 5.10: Network Settings
•
Interfaces
–
This allows the configuration of the network interface which includes setting a
static IP address and allows certain network services to be enabled or disabled.
•
HTTP Proxy
–
For the ZXi-10G to be able to update software from a network (over the
internet), proxy settings may need to be set. Networks that have a proxy server for internet
access will require proxy settings for devices like this to connect to the Internet. This typically
includes a server (or IP address), a host port, a username, and a password.
•
Network Configurations
–
Allows changes to the ZXi-
10G’s hostname and NTP server list.
•
HTTPS
–
View, select, upload, or generate HTTPS certificates for secure remote access.
3.11 Software Updates
New and improved software will be released from time to time. There are two ways to
update the software on the ZXi-10G: From the web using a network connection (with
internet access) or from a USB drive.
Details on how to perform a software update,
software re-load, or firmware update can be found in
Chapter 8: Updating/Loading/Re-loading Software
3.12 Power Off
The following tabs can be found in the Power Off screen:
Details on the different Network
Settings screens can be found in
POWER OFF
–
The ZXi-10G can be remotely turned off or restarted by going to this tab. Additionally,
the ZXi-
10G’s
screen can be refreshed.
DRIVE POWER
–
Inactive drives connected to the ZXi-10G can be set to go to standby mode in this tab.
The default is set to 0 minutes (OFF).
