QUICK START
Logicube ZXi-
10G™ User’s Manual
18
•
FORMAT
–
Select ON to format the drive.
•
FILE SYSTEM
–
Select which file system will be used to format the drive.
Optional: Tap Job Info to set the Job Name, Job ID, Operator, Other ID, or Job Notes.
7.
Tap the
Start
icon to start the Wipe task. A Secure Erase will be performed first (if
selected), then a Wipe Pattern (if selected), then finally a Format (if selected).
8.
When finished,
the status will show “COMPLETED”. At this point, it is recommended to
tap
Reset Task
to reset the task, so the drive bays properly reset and do not show as
being used or assigned for other tasks.
3.5 Task Macros
This operation allows up to five (5) macros that can be set. Each macro can run up to
nine (9) tasks sequentially (one after another). For example, a macro can be set to
perform these tasks in order: Wipe then Clone.
Details on the different screens found
in the Task Macro operation can be
found in
Each of the five macros can be set by tapping on the Macro number as seen in the next picture:
Each task or operation must be set up before setting up the macro. For example, to set up a Task
Macro that will perform a wipe, then clone, users must first set up both the wipe and clone tasks. Once
the wipe (for example, Wipe 1) and clone (for example, Image 1) have been set up, the Task Macro
can be set.
