TYPES OF OPERATIONS
Logicube SCSI-
NG User’s Manual
50
two databases (the default initial.db and lock.db). The db that shows an
asterisk (*) before the name is the current database or configuration
being loaded each time the unit is turned on.
5.
Type
db
load initial.db
then press the Enter key to load the default
database. There should be a response showing “Command
(DbManagement) Successful”.
6.
Type
db list
again and there should be an asterisk (*) on initial.db.
7.
Turn the unit off using the power button, then close the Telnet/SSH
application.
8.
Turn the unit on. When the unit boots up, it will load the default
configuration (INITIAL.DB).
5.7.2.2 User Account Passwords
This unit comes with two built-in user accounts:
logicube
it
Both user account passwords can be changed in this screen. To change the password for
either account, tap either the
LOGICUBE
or
IT
button. A screen will appear:
1.
Enter the current password.
The default password for each account is:
LOGICUBE:
logicube
IT:
it
2.
Enter a new password.
3.
Enter the new password again in the ‘confirm password’ box.
Summary of Contents for SCSI-NG
Page 12: ......
