Logicube SCSI-NG, User Manual

Page: 55 / 74

TYPES OF OPERATIONS
Logicube SCSI-
NG User’s Manual
47
5.7.2 Passwords
There are six keys or passwords that can be set or changed.

Key: Log File Deletion – A key can be set as an extra layer of protection when deleting
log files. If this key is set, a key prompt will appear, and the correct key must be entered
before any log files can be deleted.

Key: Local HTTP – A key can be set to lock the local touch screen on the unit. If this key
is set, a key prompt will appear, and the correct key must be entered before allowing
access to the local touch screen.

Key: Remote HTTP – A key can be set to lock remote HTTP access (through a web
browser). If this key is set, a key prompt will appear, and the correct key must be
entered before allowing access through a web browser.

Key: Config Lock – A key can be set to lock out any configuration changes. If this key is
set, changes to the different types of operations cannot be made without entering the
correct key. Different types of operations can still be started.
For example, if the Config Lock key is set, and the CLONE task is configured for Drive to
Image cloning, the user will be unable to change the mode to Drive to Drive but can
start the Drive to Image task.

User Account: LOGICUBE – Allows the user to change the logicube local account.

User Account: IT – Allows the user to change the it local account.
5.7.2.1 Setting Key Passwords
To set a key for Log File Deletion, Local HTTP, Remote HTTP, or Config Lock , tap one of
the buttons. The following screen will appear.