Logicube SCSI-NG, User Manual

Page: 53 / 74

TYPES OF OPERATIONS
Logicube SCSI-
NG User’s Manual
45
Optional: Tap Role and input the role for this repository.
4. Tap OK when finished. The screen will go back to the Portals screen.
5. In the Portals screen, tap the iSCSI portal to highlight it, then tap Connect .
6. The SCSI-NG will attempt to connect to the iSCSI target. If successful, a “connected”
screen will appear. Tap
OK to continue.
Multiple iSCSI connections can be added. To
disconnect an iSCSI connection, highlight the portal
to disconnect, then tap
Disconnect . To edit or delete
an iSCSI connection, tap the Edit or Delete icon.
5.7 System Settings
The System Settings screen allows users to configure several different settings which
include: Profiles , Passwords , and Language/Time Zone .
5.7.1 Profiles
Do not highlight and save over the initial.db configuration.
This is the default configuration of the unit and is used to
reset the unit to the factory default settings.
This screen shows all user profiles. There are three selections in this screen:

New – Allows the user to create a new profile name.

Save – Saves the selected profile.

Load – Loads the selected profile.