TYPES OF OPERATIONS
Logicube SCSI-
NG User’s Manual
32
When the SCSI-NG finishes hashing the drive, the ‘COMPLETED’ screen will appear showing the task
completed.
Tap the
Info
icon on the left of the completed screen to see both the expected hash value and the
computed hash value.
5.2.1 Target
Tap this icon to select which drive will be hashed. The unit will show all connected Master and
Target drives. Tap the drive to be hashed then tap
OK
.
5.2.2 Settings
Tap this icon to choose a drive to adjust the hash settings.
5.2.2.1 Hash Settings
Tap the
Hash Values
icon to set the hash method (SHA-1, SHA-256, or MD5) and to set
the expected hash value (if desired). Setting the expected hash value instructs the unit
to hash the drive then verify the hash with the expected value set. Each hash task is
Logical Block Address (LBA) based and will has the drive based on the number of LBAs.
Summary of Contents for SCSI-NG
Page 12: ......
