Logicube SCSI-NG, User Manual

Page: 23 / 74

QUICK START
Logicube SCSI-
NG User’s Manual
15
3.4.3 Deleting Log Files
Log files can be deleted one at a time or all at once.

To delete a single log file, tap the log file to highlight the log file to be deleted. Tap the
Delete icon to delete the selected log file.

To delete all the log files, tap the Select All icon to select all the log files, then tap the
Delete icon.
A log file deletion password can be set to add a layer of security when deleting log files. If a
password was set, log files cannot be deleted without entering the correct password.

If a log file deletion password was not created, a confirmation screen will appear
confirming to delete the single log file or all log files.

If a log file deletion password was created, a screen will appear prompting to enter the
log file deletion password. Enter the log file deletion password. Tap the
OK icon to
delete the single log file or all the log files (depending on which was selected).
The password can be set in the Systems Settings .
More information about the log file deletion
password can be found in
Section 5.7.2 .
3.4.4 Accessing the Logs Over a Network
The log files can also be accessed through a network on a computer if the unit is connected on
the same network.
1. Open Windows Explorer or a similar window and browse to the hostname or the IP
address found in the Statistics screen. See
Section 5.5 for more information on the
Statistics screen.