Compact Scaler Switcher 6x1
4. System Operations
4.1 Front Panel Button Control
Front panel buttons can be used for source selections, output resolution adjusting,
front panel buttons management, software updating and output screen setting.
(Please refer to chapter 2.1).
Here is the detail information for source selections:
There are 6 sources for choose in total, including HDMI1, HDMI2, HDMI3, HDMI4,
VGA1, VGA2. Video signals support auto-switching and manual-switching (factory
default). Press and hold for
SOURCE/AUTO
for
3 seconds or more
to enter in
auto-switching/ manual-switching mode.
Manual-switching:
Dial
◀
to select the previous source, dial
▶
to select the next source.
Auto-switching:
In this mode, select input source via front panel button (
◀
▶
) is not available, but
RS232 command and IR remote are able to switch mode. The auto LED turn green
and keep on.
The auto-switching mode abides by the following principles:
New input principle
Once detecting a new input signal, LG-SS501M would switch to this new signal
automatically.
Rebooting device principle
LG-SS501M have the ability of power-off memory. If the last switching mode is
auto-switching, once rebooted, LG-SS501M will automatically enter auto-switching
mode, and then detect all inputs and memorize their connection status for future
rebooting using. If the last displayed signal is still available, LG-SS501M will output the
signal. If not, the unit will detect all the inputs signals with priority from HDMI1 to VGA2.
When detected the first signal, it will transfer to output.
Signal removing principle
Once removing the current display signal, LG-SS501M will detect all input signals with
priority from HDMI1 to VGA2. It will transfer the signal firstly detected to be available to
output devices
