19
User’s Manual of Smart Box 9070 - Revision 1.0
Touch Panel (optional)
5-wire Resistive / Acoustic / Capacitive
Built-in Speakers
8 ohm 2W x 2
5-wire Touch
Positional Accuracy
Standard deviation of error is less than 0.080 in. (2.03 mm).
This equates to less than ±1%.
Touchpoint Density
More than 100,000 touchpoints/in2 (15,500 touchpoints/cm2).
Touch Activation Force
Typically less than 4 ounces (113 grams).
Surface Durability
Meets Taber Abrasion Test (ASTM D1044), CS-1OF wheel, 500g. Meets pencil hardness 3H.
Expected Life
Has been operationally tested to greater than 35 million touches in one location without
failure, using a stylus similar to a finger.
Optical
Light Transmission (per
ASTM D1003)
Typically 85% at 550-nm wavelength (visible light spectrum).
Visual Resolution
All measurements made using USAF 1951 Resolution Chap, under 30 X magnification, with
test unit located approximately 1.5 in. (38 mm) from surface of resolution chart.
Antiglare surface: 6:1 minimum.
Haze (per ASTM D1003)
Antiglare surface: Less than 15%.
Gloss (per ASTM 02457)
Antiglare surface: 90 + 20 gloss units tested on a hard-coated front surface.
Line Display
Digits per Row
20
Number of Rows
2
Digit Configuration
5 x 7 Dot Matrix
Digit Height
0.37 in. (9.5mm)
Digit Width
0.24 in. (6.2mm)
Digit Pitch
0.30 in. (7.7mm)
Character Configuration
ASCII
Brightness
900 cd/m2 Typical
Display Color
Blue-green
Interface
USB with virtual COM port driver
Command Set
LCI OPOS, other command sets optional
Magnetic Stripe Reader
Track Width
1.4 mm
Core Material
Permalloy or Sendust
Life
>1,000,000 passes
Card Feed Speed
100 to 1200 mm/sec
Card Feed Force
90g typical, 180g max.
Direction
Bi-directional
Interface
USB (HID keyboard emulation)