10
User’s Manual of Smart Box 9070 - Revision 1.0
Chapter 3
Installation
Hardware Installation
The Smart Box 9070 is shipped with cables already installed in the all-in-one touch terminal and connected
properly. It only need to connect the power cord, network cable, and other external peripheral devices such as receipt
printer or bar code scanner. In case re-installation of the cables is required, follow the steps below.
Before connecting cables to the all-in-one touch terminal and computer, be sure that power of the computer and
all-in-one touch terminal are turned off. Power switch of all-in-one touch terminal is located on the front of the monitor
stand.
1. Remove 2 screws from the front of the monitor stand and pull back the stand back cover to open.
2. Thread the VGA video cable, audio cable, USB cable, and DC power cord through the oval hole at the front
of the monitor stand.
3. Connect the video cable to touch monitor VGA connector. Tighten by turning the two thumb screws clockwise
to ensure proper grounding.
4. Connect the USB cable to the touch monitor USB input.
5. Plug the audio cable into the audio jack of the touch monitor.
6. Plug the DC power cable into the DC power jack of the touch monitor.
7. Thread all cables through opening at base plate of stand so that all cables go into the computer metal base
case.
8. Thread the DC power cable of the power adapter through the opening at the base from the bottom and plug
into the power socket at the back of the metal base case. Close the back cover.
9. Secure the back cover with the 2 screws from the front.
10. Connect VGA cable, audio cable and USB cable to the corresponding connectors on the computer board.
11. Connect one end of the power cord to the all-in-one touch terminal power adapter and the other end to the
power outlet.
12. Press the power switch on the front of monitor stand to turn on the power.
1
2
1.
Power Adapter Input
2.
Serial Port
3.
Speaker out / Mic In
4.
Keyboard / Mouse Input
5.
Video Output
6.
USB Port
7.
Ethernet Port
Observation:
If the all-in-one touch terminal has integrated line display option, the line display USB driver has
to be preinstalled before making connections. Refer to Software Driver section for details.
1
2
3
4
5
6
7