Open Plastic Cutter
1. Open cutter from safety setting (Fig. 13)
Cut Plastic (Plexi)
1. Measure dimensions using scale on cutting rail (fig. 14).
2. Make reference marks on the plexi using a grease pencil (fig. 15).
3. Align channel edge to dimension mark and see the bottom angle of the square is tight against the material (fig. 16).
4. Set tip of cutter at edge of plastic and against channel edge, hold the tool at an approximate 45° angle (fig. 17).
5. Keep even downward pressure and against channel rail, pull cutter across plexi completely. (fig. 18)
6. Make at least three complete passes over the plexi.
7. Slide plexi to align score with edge of table (fig. 19).
8. Press down firmly on overhanging plexi to seperate.
CAUTION!!
BLADES ARE SHARP
Fig. 13
WARNING: SAFETY FIRST!
WEAR EYE PROTECTION AND
GLOVES WHEN WORKING
WITH PLEXI.
Fig. 19
Fig. 18
Fig. 17
Fig. 16
Fig. 15
Fig. 14
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084, 847-526-5515, www.logangraphic.com
4
Instruction Manual
Glass & Plexi Cutting Tool
Model F503
