Cut Glass
1. Measure dimension using scale on cutting rail aligning angle bar against glass edge (Fig. 6).
2. Make reference mark on the glass using a grease pencil (Fig. 7).
3. Align channel edge to dimensions mark and see the bottom angle of the square is tight against the material (Fig. 8).
4. Squeeze a drop of cutting oil onto glass wheel (Fig. 9).
5. Hook glass cutter onto guide rail past end of glass. Pull cutter until wheel contacts the glass (Fig. 10).
6. Pull glass cutter, keeping even and moderate constant downward pressure throughout the entire length of score.
NOTE:
Only score glass once. Do not retrace score.
7. Slide glass to align score with edge of table (Fig. 11).
8. Carefully press down on overhanging glass to seperate.
WARNING: SAFETY FIRST!
WEAR EYE PROTECTION AND
GLOVES WHEN WORKING
WITH GLASS.
Fig. 11
Fig. 10
Fig. 9
Fig. 8
Fig. 7
Fig. 6
Change Glass Cutting Wheel
1. Loosen wheel shaft knob (Fig. 12)
2. Carefully remove wheel and shaft.
3. Slide wheel off shaft.
4. Replace new wheel on shaft.
5. Reassemble.
Glass Cutting Wheel
Shaft
Wheel Shaft
Knob
Fig. 12
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084, 847-526-5515, www.logangraphic.com
3
Instruction Manual
Glass & Plexi Cutting Tool
Model F503
