- 6
Change station
You can set an analogue station manually.
➠
Not with Digital Link Plus (DLP).
Open the
Station list
menu (page 5).
5
6
Select
PR
number.
Confirm.
5
6
Select
Program Edit
.
Confirm with
OK
.
The
Program Edit
menu is displayed.
25
S 23
PAL
0
ON
OFF
OK
PR Seek Ch. MFT DECODER NICAM PAL/SECAM
3
4
Move the cursor to the previous / next column.
5
6
Edit the setting at the current cursor position.
Explanations of the settings
PR
Indicates the selected station number (display only).
Seek
Searches for stations automatically.
3 4
Select
Seek
and then
5 6
start search. The search is stopped when the recorder
receives a station.
Ch.
Changes the channel number.
3 4
Select
Channel
and then
5 6
set.
MFT
Changes the frequency for manual fine tuning.
3 4
Select
MFT
and then
5 6
set.
DECODER
When option
ON
coded stations are received by a connected
decoder.
NICAM
Switch NICAM reception on/off. Select option
OFF
in case of
sound interference.
PAL/SECAM
changes the reception standard for Viewvision DR+ DVB-T
Secam.
3 4
Select
PAL/SECAM
in case of distorted negative
picture.
5 6
Select
SECAM
for the SECAM-L standard.
OK
Save settings.
Moving stations
You can sort the order of analogue stations in the
Station List
menu.
➠
Not with Digital Link Plus (DLP).
➠
Not valid when receiving digital TV channels which have a permanent pro-
gramme assignment number (LCN).
5
6
Select station in the
Station List
menu.
Confirm with
OK
.
The available options are displayed at the bottom left.
5
6
Select
Move
.
Confirm with
OK
.
5
6
Select desired
PR
slot.
OK
Save settings.
Delete Station
You can delete a station in the
Station List
menu.
➠
Not with Digital Link Plus (DLP).
5
6
Select station in the
Station List
menu.
Confirm with
OK
.
The available options are displayed at the bottom left.
5
6
Select
Delete
.
OK
The station is deleted.
Initial Installation
