Operation
WeftMaster CUT-iT
www.loepfe.com
21
4.3.7
Setting the current strength
Activating
when changing settings interrupts the process and Setting mode is
exited without saving the changes.
Standby current strength with machine stopped
ü
The weaving machine is idle.
1.
Press for 3 seconds.
ð
Display:
«Tune-Standby»
(setting in Standby mode)
2.
Press to select desired setting.
3. If no button is pressed within 10 seconds.
ð
Setting mode is exited without saving any changes.
4.
Press to confirm desired setting.
ð
Display:
«Execute»
(execute)
ð
The setting is saved.
Run current strength with machine stopped
ü
The weaving machine is idle.
1.
Press for 3 seconds.
ð
Display:
«Tune-Standby»
(setting in Standby mode)
2.
Press to switch to settings in
« Run mode»
.
ð
Display:
«Tune-Run Current»
(current strengths setting in Run mode)
