Loctite EQ RC24 RD, Operating Manual

Page: 53 / 60

CARE AND MAINTENANCE
53
Care and Maintenance
The controller and drive are considered to be maintenance free.
Maintenance of the Screen
In order to ensure the legibility of the screen at all times, this must not be touched with dirty
fingers or other items, and the plastic surface must not be scratched.
The screen can be carefully cleaned from time to time if necessary with a cotton cloth
moistened with a mild solvent (e.g. rubbing alcohol or window cleaner). For this the device
must be switched off and disconnected from the power supply. Under no circumstances
must any cleaning fluid be allowed to come into contact with the area around the power
switch. It must be ensured that all residues of the cleaning agents have completely
evaporated before the device is switched back on.
Monitoring mechanical Wear
The entire drive unit (motor, planetary gear and drive ball bearing) is subject to mechanical
wear. It must be checked regularly by visual inspections in order to avoid damage to the
RC24.
Check the housing parts for damage, the shaft for smooth running and the bearings for
smooth running and tightness.
Lubrication
Due to the special design of the machine (e. g. lifetime lubricated ball bearings), lubrication is
not necessary.