L110C/L110 SLIDING GATE OPERATOR
3
1. Important safety information
Carefully read and follow all safety precaution and warnings before attempting to install and
use this operator, incorrect installation can lead to severe injury.
The gate operator should be installed by a qualified technician; otherwise, serious
personal injury or property damage may occur.
The automatic gate operator must be grounded.
When opening or closing the gate, do not attempt to walk or drive through the gate.
Children should not be allowed to play near or operate automatic gates.
Install the gate operator on the inside of the property, DO NOT install it on the outside of
the property where the public has access to it.
Be careful when in close proximity to moving parts where hands or fingers could be
pinched.
The operator should be switched off before repairing it or opening its cover.
2. Main functions
The gate operator is used to drive the sliding gate, it is capable of overwork in short time.
When overloading, it has electrical and mechanical double protections to ensure operating
safety. In case of power failure, a release key allows to loosen the clutch to move the gate
manually.
3. Technical parameters
Type L110C
L110
Limit switch
Magnetic limit switch
Spring limit switch
Power supply
AC110, 60Hz
Output torque (Max.)
15N
·
m
Motor speed
1650rpm
Reduction ratio
1:30
Environmental temperature
-10ºC to +55ºC
4.Packing list
After receiving the product, you should make an unpack-inspection, in which you should check
whether the product was damaged. If you have any problem please contact dealer.
L110C gate operator packing list
No. Item Quantity
1 Gate
operator
1
2 Release
key
2
3
Operator base (spare accessory)
1
4 Tighten
bar
2
5 Magnet
bracket
2
6 Sprocket
cover
1
7
Screw for mounting driven sprocket bracket (M8X16)
4
8
Anchor bolt with nut
4
9
Driven sprocket bracket (left side & right side)
2
10
Magnet
2
11
Anchor
4