background image

2

ᾀᵌ

ᵲᶆᶃᴾᵿᶇᶐᴾᶎᶐᶃᶑᶑᶓᶐᶃᴾᶑᶆᶍᶓᶊᶂᴾᶀᶃᴾᶉᶃᶎᶒᴾᶕᶇᶒᶆᶇᶌᴾᶒᶆᶃᴾᶐᵿᶌᶅᶃᴾᶍᶄᴾᵎᵌᵓᴾᶒᶍᴾᵎᵌᵔᴾᵫᵮᵿᵌ

㻌㻌䞉

If an air pressure which is greater than this is used, the tool may become damaged, and

      injury or damage to property may result.

ᾁᵌ

ᵬᶃᶔᶃᶐᴾᶊᶍᶍᶉᴾᶇᶌᶒᶍᴾᶒᶆᶃᴾᶌᶍᶑᶃᶎᶇᶃᶁᶃᴾᶍᶄᴾᶒᶆᶃᴾᶒᶍᶍᶊᵊᴾᵿᶌᶂᴾᶌᶃᶔᶃᶐᴾᶎᶍᶇᶌᶒᴾᶒᶆᶃᴾᶌᶍᶑᶃᶎᶇᶃᶁᶃᴾᶒᶍᶕᵿᶐᶂᴾᶍᶒᶆᶃᶐᴾᶎᶃᶐᶑᶍᶌᶑᵌᴾᴾ

㻌㻌䞉

If the tool is used while the cut mandrels are still inside the tool not being ejected these mandrels 

     may be ejected from the tool’s nosepiece during use and cause serious injury.    

ᾂᵌ

ᵬᶃᶔᶃᶐᴾᶂᶇᶐᶃᶁᶒᴾᶒᶆᶃᴾᶃᶌᶂᴾᶍᶄᴾᶒᶆᶃᴾᶁᶆᶓᶒᶃᴾᶆᶍᶑᶃᴾᵆᶔᶃᶌᶒᴾᶍᶄᴾᶁᶓᶒᴾᶐᶇᶔᶃᶒᴾᶋᵿᶌᶂᶐᶃᶊᶑᵇᴾᶒᶍᶕᵿᶐᶂᴾᵿᶌᶗᴾᶎᶃᶐᶑᶍᶌᵌ

㻌㻌䞉

Cut rivet mandrels may be blasted off  from the end of the chute hose and may cause injury.

ᾃᵌ

ᵫᵿᶉᶃᴾᶑᶓᶐᶃᴾᶒᶍᴾᶎᶓᶒᴾᶒᶆᶃᴾᵡᶆᶓᶒᶃᴾᵦᶍᶑᶃᴾᶕᶆᶃᶌᴾᶓᶑᶇᶌᶅᵌ

ᴾᴾᴾᴾ

ᵟᶊᶕᵿᶗᶑᴾᶕᶃᵿᶐᴾᶎᶐᶍᶒᶃᶁᶒᶇᶔᶃᴾᶅᶍᶅᶅᶊᶃᶑᴾᶕᶆᶇᶊᶃᴾᶗᶍᶓᴾᶓᶑᶃᴾᶒᶆᶃᴾᶒᶍᶍᶊᵌᴾ

㻌㻌䞉

Spent mandrels may come out and cause the injuries.

㻌㻌䞉

Make sure to put the Chute Hose properly all the way (Nozzle Unit). 

     If the Chute Hose was not set properly, the hose may fall off  and cause injuries.

ᾄᵌ

ᵫᵿᶉᶃᴾᶑᶓᶐᶃᴾᶒᶆᵿᶒᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᵿᶌᶂᴾᶒᶆᶃᴾᵿᶇᶐᴾᶑᶍᶓᶐᶁᶃᴾᵿᶐᶃᴾᶁᶍᶌᶌᶃᶁᶒᶃᶂᴾᶑᶃᶁᶓᶐᶃᶊᶗᵌ

㻌㻌䞉

If the threads of the joints do not match or if the screws are not inserted far enough, the air hose

     may become disconnected during use and injury may result.

㻌㻌䞉

Use hose bands to securely connect the air hose joint and air hose. If they are not securely

䚷㻌㻌

     connected, the air hose may become disconnected during use and injury may result.

ᾅᵌ

ᵲᶓᶐᶌᴾᶍᶄᶄᴾᶒᶆᶃᴾᵿᶇᶐᴾᶑᶓᶎᶎᶊᶗᴾᶀᶃᶄᶍᶐᶃᴾᶂᶇᶑᶁᶍᶌᶌᶃᶁᶒᶇᶌᶅᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶄᶐᶍᶋᴾᶒᶆᶃᴾᵿᶇᶐᴾᶑᶍᶓᶐᶁᶃᵌ

㻌㻌䞉

Compressed air may cause the air hose to whip around and injury may result.

ᾆᵌ

ᵡᶆᶃᶁᶉᴾᶒᶆᵿᶒᴾᵿᶊᶊᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶎᵿᶐᶒᶑᴾᵿᶐᶃᴾᶄᶐᶃᶃᴾᶄᶐᶍᶋᴾᶂᵿᶋᵿᶅᶃᴾᶀᶃᶄᶍᶐᶃᴾᶓᶑᶃᵌᴾᵟᶌᶗᴾᶂᵿᶋᵿᶅᶃᶂᴾᶎᵿᶐᶒᶑᴾᶑᶆᶍᶓᶊᶂᴾᶀᶃ

ᴾᴾᴾᴾ

ᶐᶃᶎᵿᶇᶐᶃᶂᴾᶀᶃᶄᶍᶐᶃᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶇᶑᴾᶓᶑᶃᶂᵌẅᴾ

ẅᴾ

㻌㻌䞉

If the tool is used while any parts are damaged, injury may result.

㻌㻌䞉

If the tool is damaged by objects being dropped onto it, the damaged part may break and accident 

     or injury may result. 

䚷㻌䚷䚷䚷

㻌㻌䞉

Don't pull and drag the tool by the air hose. It may trigger some damages on the tool body, 

     breakage of Rotary Joint or some other defects and lead serious troubles with injuries.

ᾇᵌ

ᵧᶄᴾᶓᶑᶇᶌᶅᴾᶇᶌᴾᶃᶊᶃᶔᵿᶒᶃᶂᴾᶊᶍᶁᵿᶒᶇᶍᶌᶑᵊᴾᶓᶑᶃᴾᵿᴾᶑᵿᶄᶃᶒᶗᴾᶆᵿᶐᶌᶃᶑᶑᵊᴾᵿᶌᶂᴾᶒᵿᶉᶃᴾᶁᵿᶐᶃᴾᶒᶍᴾᵿᶔᶍᶇᶂᴾᶂᶐᶍᶎᶎᶇᶌᶅᴾᶐᶇᶔᶃᶒᶑ

ᴾᴾᴾᴾ

ᶍᶐᴾᶒᶆᶃᴾᶒᶍᶍᶊᴾᶇᶒᶑᶃᶊᶄᵌᴾ

㻌㻌䞉

Accident or injury may result if this practice is not followed.

⅐ ※‿⁂⁁⁄⁆″⁀⁆‒⁅″‸‷⁆⁋‒※⁀⁅⁆⁄⁇‵⁆※⁁⁀⁅

ᒍᛖ὾ᾔᾝᾖᾛᾘᾢᾗ

Be sure to read the following Important Safety Instructions carefully and make sure that you

    understand them thoroughly before using this tool.

Always wear protective goggles while using the tool. 

    The rivets may jump out by accident and cause injuries.

◆ 

◆ 

◆ 

◆ 

◆ 

英語/ENGLISH

英語/ENGLISH

This is the safety alert symbol. It is used to alert you to potential personal injury hazards.

    Obey all safety messages that follow this symbol to avoid possible injury or death.

Af t er reading this manual, keep it in a safe place where it is easily accessible to all users.

                      

: Indicates a potentially hazardous situation which, if ignored, may result in death

                          or serious injury to the operator.
                        : Indicates a potentially hazardous situation which, if ignored, may result in moderate 
                          injury to the operator or physical damage.
 Moreover, failure to follow the instructions marked with the                       symbol or cautions without a
                        symbol which appear in the text of this manual may also have serious results in some

cases. Always be sure to observe the instructions given in the lmportant Safety Instructions.

These Important Safety Instructions are divided into                       and                       .

    The diff erences between these two levels are described below.

ᵵᵟᵰᵬᵧᵬᵥ

ᵵᵟᵰᵬᵧᵬᵥ

ᵵᵟᵰᵬᵧᵬᵥ

ᵡᵟᵳᵲᵧᵭᵬ

ᵡᵟᵳᵲᵧᵭᵬ

ᵡᵟᵳᵲᵧᵭᵬ

ᵡᵟᵳᵲᵧᵭᵬ

Summary of Contents for Lobster ARV-025M























Reviews: